With the high speed and precision of the sensor, machine builders can keep the position error in motor control applications to a minimum. As with all inductive linear position sensors, the high-speed variant has very short blind zones and can tolerate up to a 4 millimeter offset of the positioning element. As well as the high-speed variant with an SSI interface and 16-bit resolution, the angle sensor will also be offered in future with the higher output rate of 5 kHz. All Huiren Electronics sensors continue to be available in ten measuring lengths from 100 to 1,000 millimeter.
Positioning sensors is linear slider potentiometer with a long lasting conductive track suitable for absolute position measuring in control and Measurement applications. This series displacement transducers Designed for the direct, absolute measurement of displacement or length in control regulation and measuring applications. http://www.zjhrsensor.com/
2016年7月31日星期日
2016年7月27日星期三
A new electronics sensors
A new electronics architecture increases the effective output rate of the sensor from 1 to 5 kHz. In conjunction with the short signal run time and the highly resolved output, the inductive linear position sensors can thus achieve the performance of potentiometers but without their disadvantages. Unlike potentiometers, the home position sensor offer permanent protection to IP67, provide non-contact measuring and are absolutely wear-free. The magnetic field immune sensors are therefore suitable for measuring axes with high-speed controls such as is used in injection molding machines.
2016年7月23日星期六
Huiren Electronics Linear Sensors
Huiren Electronics industrial position sensors measure the precise position of a target. They are built using conventional PCB technology, which is accurate, stable and cost effective. Sensors work with Central Tracking Unit family of single chip processors to provide high-quality position data to a host device.
These non-contact linear sensors are available as Sensor Blueprints in Gerber format, to enable integration with a customer’s own PCB. They are also available as assembled sensors for evaluation, customer prototyping and low-volume production.
These non-contact linear sensors are available as Sensor Blueprints in Gerber format, to enable integration with a customer’s own PCB. They are also available as assembled sensors for evaluation, customer prototyping and low-volume production.
2016年7月19日星期二
High performance precision linear potentiometers
These high performance, high temperature precision linear potentiometers are designed for the most demanding control and measurement applications. They are constructed from aluminum alloy and stainless steel for high strength and durability, yet are lightweight in design, making them ideal for industrial, automotive and motor racing measurment applications. The sensors are sealed to IP66 as standard and feature fire and chemical resistant high temperature potentiometer rotary position sensors signal cabling ensuring total system reliability. The physical design of these slim body linear potentiometers enables their survival in the severest of environmental conditions.
2016年7月15日星期五
Linear potentiometer position sensor application
The linear potentiometer position sensor can be used in any linear application up to 1200 inches. The system consists of a heavy-duty spring motor assembly attached to a precision machined cable drum. As the cable is pulled off of the precision drum, the drum rotates a shaft connected to it. The shaft is precisely geared such that the full number of revolutions of the drum is equal to the appropriate number of revolutions required by the chosen sensor. The Linear Sensor can provide accurate position feedback for linear motion up to 100 feet. Mounting for either resolver, encoder, cam switch or rotary potentiometer.
2016年7月11日星期一
Huiren Electronics Rotary Position Transducers
Huiren Electronics rotary linear position transducers provide an analog output signal that is directly proportional to the angle of rotation of the shaft of the device. With a voltage or 4 to 20 mA analog electrical output, rotary position transducers are also known as angle sensors, analog rotary shaft encoders and analog multiturn analog shaft encoders and absolute angle encoders. These devices are commonly used in applications where an absolute output signal is a must. Typical use occurs in closed loop process control and in testing applications where oscillatory rotary motion occurs. Huiren Electronics absolute analog rotary position transducers have proven to be an extremely cost effective alternative for measuring rotational positioning.
2016年7月7日星期四
The potentiometer rotary position sensors from Huiren Electronics
The positioning sensors camera-based system determines the current position based on a mounted bar code tape. This acts as a reference point against which the Huiren sensor can position itself accurately, depending on variants, over a length of up to 10 km and as little as 0.15 mm, regardless of whether the product travel path is in a straight line or curved.The potentiometer rotary position sensors determine lengths and speeds using the laser Doppler effect. This technology enables extremely precise measurements to be made of almost any material – at speeds of up to 80 m/s and material temperatures of up to 1,100°C.
2016年7月3日星期日
Linear position sensors
Linear position sensors use highly innovative technologies for the non-contact measurement of positions, speeds, and lengths. Huiren Electronics hrsensor designs and manufactures linear position sensing solutions that encompass magnetoelastic, field-effect, conductive inks, capacitive, eddy current, optical, electro-mechanical, and hall-effect technologies. Our portfolio addresses diverse applications in a broad range of industries including automotive and medical.
订阅:
博文 (Atom)